Schematics for the Chipstomp

Here are the schematics for the Chipstomp.
I’ve tried to keep as much compatibility with the original DP32 circuit but I have removed superfluous elements such as the on-board potentiometer and one of the user leds. I’ve also added an additional tactile button, the OLED and resistor mixed Stereo to Mono input/outputs.
Other than that it’s essentially just a joining of the ChipKit DP32 with the Stomp Shield.
ChipStomp v1 (PDF 90Kb)Eagle CAD schematic – Zipped (88Kb)

Schematic v1

Chipstomp version 1 schematic PNG (2300×1500px, 80Kb)

Drum machine progress : From prototype to version 2

I’ve not posted in a long time so here’s a quick update on the progress of my drum machine. It’s come a fair way from the initial prototype documented in this post back in July 2012.

IMG_3625

A sneak look at version 2 with a new 32bit PIC and a new larger LCD

Continue reading

Breakout board for Nokia 1202 LCD

I’ve been using Nokia 5110 LCD screens for a while now they’re 84x48px have a built-in back-light and are really easy to use and quite cheap.  Recently though whilst working on my drum machine I found myself wishing for a few more pixels.  I want to show a “pattern view” of 16 tracks with 16 steps plus some additional information and 84×48 was getting too tight.

IMG_3618

This isn’t a Nokia1202, this is a Sparkfun Nokia 5110 breakout

Continue reading

Lighthouse schematics and files

Update: I’ve revised the schematic for this project and had a proper PCB made, see the new version here.

For anyone who is interested (Hi Richard) here are my project files for the lighthouse project.

The project is written for the PIC12f683 using SourceBoost Technologies BoostC that I use as a tool suite in  Microchip’s MPLAB.  BoostC is fairly ANSI so if you’re using another C then it wouldn’t be hard to convert.  There’s a free version of BoostC too and I think my program will fit within it’s limits.

C source code here (7kb). : Compiled hex binary here (1kb zip).

The schematic and circuit are drawn up using the free version of Cadsoft Eagle. They were created using version 4, but the latest version of Eagle is v5 which I’ve not used yet, however the circuit is fairly simple so I doubt there would be any problems.

Hig resolution combined print for top and bottom of circuit.

High resolution combined print for top and bottom of circuit for toner transfer. (4800x2222px, 163Kb)

Schematic layout of circuit. Note that in the real thing I added a couple of DIP switches in the GP0 & GP1 lines just before the resistors R4 & R5 to isolate the ICSP lines when programming.

Schematic layout of circuit. Note that in the real thing I added a couple of DIP switches in the GP0 & GP1 lines just before the resistors R4 & R5 to isolate the ICSP data and clock lines when programming. (25kb)

I’ve not included the Eagle files themselves as they make use of some random parts that I’ve made in my own library.  But the circuit is not so complex that you couldn’t copy it.  If you really want them then let me know.

If you have any problems drop me a line.